1/09/2010

The Pellicle and the Smoke

First let me say that the freezer bags half filled with water did a very good job of keeping the cure at around 36 degrees. 4 bags last 24 to 36 hours.

I got home last night around 5pm. drained the cure and hung up one of the slabs to dry for an hour. While that was happening I setup the smoker.
To power the fan I used an old multipurpose hobby electronics deal, thingy....(I don't remember what it is called). It has a signal generator, variable ac power supply, and variable dc power supply (among other things). Which was given to me by one of my sisters ex-husbands.
Anyways, I hooked the variable dc connection to the fan and set the voltage so that it would run the fan at the lowest voltage that would make the blades move. I then attached this to an electric timer to turn on and off about every 15 minutes. Off 15 minutes on 15 minutes.
I loaded the smoker with hickory wood chips and kept an eye on it till 23:00. Adding wood chips every 30 minutes or so. I ran a rod through the meat and hung it in the center of the cold smoker. I had to cut off the bottom 3 inches to keep it from touching the bottom of the can. I hung that piece from the rod as well.
After 5 hours of smoking I pulled the meat out and cut it into 4 or 5 inch wide pieces and froze them. I will slice later. I immediately fried some up, but will save the taste report for later. This morning I got up at 06:00 and did the same thing with the second slab. I will smoke this for at least 6 hours.

1/06/2010

The Cure

Last night I made my cure for the BACON! I skinned the bellies as well. I will not post pictures as it was rather gross, and extremely difficult. The nipples did not help matters (yes nipples). For some reason the phrase "it puts the lotion on..." kept popping into my head. Anyways the bellies are in the brine, in a cooler, with bags of ice, which I will have to change out about every 12 hours. Next step
"the pellicle".

12/31/2009

Building the Smoker

Way back when I first got into smoking meats, and before I decided to invest in a real smoker, I built the Alton brown Trash can Smoker. It worked so well I immediately purchased a real smoker. In preparation for smoking my BACON!, I converted it into a cold smoker. I went to Home Depot and purchased a second garbage can for $22.00. I had a long length of thin aluminum dryer tubing (never used) and some other parts. First thing I did was attach the Aluminum tubing and reducer to the new trash can at the bottom using pop rivets and duct tape on the inside.
I Attached the ducting with a large hose clamp. Attached a computer power supply fan to the top of the can on the opposite side.
The finished can looks like this.
I attached the other side of the hose to the old smoker and duct taped it in place.
I will be using a hot plate to generate the heat for the smoke. As a test I powered on the fan, lit some paper towels and put them in the old smoker. In a few seconds smoke came out. and after traveling through the long tube it was cooled by the outside air. Here is the results.
Unfortunately I do not have the meat ready to smoke yet, so I will start curing it this Wednesday and smoke it on the weekend.

12/30/2009

The Once and Future BACON!

Well..... After a long absence, I finally have something to blog about.

IT'S BACON!!!

I have been wanting to make my own BACON! for a while now, but I had to wait till the outside temperatures were low enough for cold smoking. That means I have a narrow windows of opportunity over the next month or so. Cold smoking requires temperatures of 70 degrees or less. Today I went to Hobe Meats at 6044 N 16th St, Phoenix, AZ and picked up 2 whole pork bellies (frozen, skin on). They were $4.99 per pound. Total was over $100.00 (if your gonna make BACON!, make a lot). I will be using the Alton Brown Cure for this, and will probably smoke them next week (once I build my cold smoker). Stay tuned.