Refurbishing a Trailer Part IV

We spent this day getting the second leaf spring mounted, and lined up as close to the first one as we could.

We had to make a front bracket that was taller as the 2 leaf springs are mis-matched. This side is shorter than the other side.

We also had to make new brackets for the expansion hinge because of the difference in bolt size.

Lining up the 2 springs required moving the trailer to the patio and leveling it as best we could. we used a straight edge, plumb bob, and levels. We managed to get it pretty close.

The big things that the bow of the 2 leaf springs are the same height and the holes are somewhat lined up.

Next week we will be building the axel and mounting the spindles to it.