8/20/2013

Sears Silvertone 8013

Got this radio off of ebay as well. I should have looked closer at the pics as there are cracks on top and bottom. I fixed them with epoxy and found a missing piece inside the chassis. I also had to epoxy the plastic pieces that the screw for the back panel screw in to. The plastic in this radio is very brittle.
 If I remember correctly this radio did not need a recap. I did replace the phono RCA jack with a 3.5mm Audio/MP3 input. Picture below is before that.
I could not find a schematic etc. for this radio on line but everything was on the bottom.



No comments: