3/04/2010

First Music Video

For those that don't know, I have a channel on Youtube. Where I have been uploading some of my video's. Here is my most recent one.

2/20/2010

Sanity

I will now take from you, your Sanity.

1/31/2010

How to Crash Airplanes 101

So... a week ago I bought a Parkzone Radian from the Hobby Bench on 19th ave and Northern, and Daniel bought an upgraded Guan Li A-10 from nitroplanes.com. We were both chomping at the bit to fly them this weekend.

Self - "No don't do it, it's too windy!"
Me - "Shut up self!"
Self - "Maybe Daniel will talk some sense in to him".
Daniel - "FLY AIRPLANES!"
Self - "I'll be over here if anyone needs me...."

So my plane is totaled, There were pieces missing and I can't glue the nose back together. I am trying to locate a replacement, but no one has the fuselage in stock right now. Instead I took the receiver out of the Radian and put it into the Hawk sky, so I can fly it on 2.4ghz. That almost ended up bad as I had the elevator servo reversed on my first take off attempt today, and the plane was tail heavy because I didn't have the battery far enough forward. I would have flow again today but just after I landed the wind kicked up again...

Self - "Oooooh, Now you listen to me!"
Me - "Whatever."

Daniel tried flying again today and was doing a pretty good job until his transmitter or receiver cutout and the plane dropped out of the sky like a rock.
The above image was taken seconds after his A-10 crashed (trips over).
So then we had to repair it.



So after much epoxy and tape we got it back together.
Daniel reports later in the day that there is a problem with one of the motors.
We also worked on his old Cessna, which has 2 bad servos and now a broken propeller, This is what happens when a propeller walks up your arm, when it comes on unexpectedly.

1/24/2010

Daniel's First Flight

Yesterday my nephew Daniel stopped by with Karen his mother, he found out I had an RC simulator. So he stayed overnight playing on the simulator. Since he was real good at it (and he had sort of flown an RC plane before), the next day (today) we got up somewhat early and went to the vacant lot and, I flew the plane once, then let Daniel fly. Here is that Flight.

Here is another Flight Daniel did with the camera facing to the rear.

And this flight I flew with the camera mounted on the belly of the plane.

Finally here is Daniels flight with the camera pointed to the right. Watch for the loop.

Total flights for today was 5 for me and 5 for Daniel.

1/14/2010

The Tasting

If you have been reading my previous Posts Here, Here, Here, and Here. You know I have made my own BACON! So.... How does it taste. Well pretty damn good. First off this is BACON! that is not for the faint of heart. This is Fire Fighter BACON! This BACON! makes the smoke alarm go off when you bring it out. The closest any other BACON! comes to this is "Newsom's Old Mill Store Hickory Smoked Country Bacon". Since I used Alton Brown's Scrap Yard Challenge BACON! cure, this BACON! is a little on the sweet side (but not much) you definitely get the taste of molasses and cider every once in a while. The BACON! is not salty, in fact The next time I make it I will drop the Sugar and maybe add an additional half cup of salt to the brine. It does not have the "hammy" taste that many bacon's have. There are no nitrates in this cure so the meat will not be a pretty pink (but I couldn't care less). Because of the extra sugar the BACON! tends to brown quickly, and if cooked at too high heat will burn easily. The smokiness varies but is refreshingly strong. One of my brothers described it as "eating a burning building, or campfire" There is relatively little curling, and almost no splatter as I did not "inject" the cure into the bacon like most manufactures do. The meat has a light almost porky flavor and the fat is where you will find the molasses and apple cider flavors. Mike reported the BACON! is good, but every once in a while you bite in to a part of it that taste "REALLY GOOD". The meat is very tender, as compared to how it was before being cured (I cooked some up before hand to compare).

Things I would change:
Get skinned, loin end bellies (they are thicker).
Skip the extra sugar in the cure.
Add a little extra salt.
Cure the bacon for 5 days instead of 3 (cure needs more time to penetrate).
Smoke with Cherry, or Apple wood.

1/13/2010

1/10/2010

First Crash

So we went out today to fly the plane again, even though it was a bit too windy. First flight I did pretty good, the repairs to the landing gear held. Landing was tough as I had a 5 to 10 mph head wind. The plane either wanted to stay up or wanted to nose dive. Flight 2 went well. Flight 3..... eh not so much. I misjudged the distance and flew over the apartment complex nearby (which I did not want to do, the wind was blowing me way off course). On the last go around I was over the parking lot and flew into a palm tree (ouch). It put a small dent in the right wing, and broke the hot glue joints (nothing major). Foam planes can take a lot of punishment. Here is the video.

Flew it several more times, landings were a bit tricky. So you know if you haven't destroyed the plane, why stop? The last flight was going good, I even did another barrel roll, but as I came in for a landing I over corrected, flipped over, and nosed dived straight into the ground. Severely bending the landing gear, and munging the nose. See for your self.


More pictures from Chris.
Oh The Carnage, Note the cockpit cover to the right of the plane.

Well "Trips over", we went home. Later, using epoxy and packing tape I glued all the cracks in the foam, and tried to put the nose back into shape. I straightened the landing gear, re-glued the wings on, and we will see how she fly in a week or two.

First Flight

Ever since I was a wee lad, I always wanted a remote controlled airplane, but I/we never had the money/time, or whatever. So recently I started looking online and found a website www.nitroplanes.com. I saw a lot of planes I liked, and had to have, but finally settled on something more on the trainer side. I picked the Dynam Hawk Sky (weird name, I guess "Sky Hawk" was already taken). Anyways. I ordered it and the E-sky Flight sim and USB 4 Channel transmitter. I read up on it and it had some bad reviews, so I downloaded Clearview and installed that on my Windows XP Media Center pc, with our 37" HD TV. In the meantime I ordered an extra Battery and one of these.

Although I have actual flight time, and soloed in a Piper Warrior, used many different flight simulator, I figured it would be worth the money to practice on the sim before trying to fly the real thing. Turned out to be a good idea, as I crashed a lot. So for the last week I have been practicing for 1 or 2 hours a night. Of the many planes I tried the Cessna 182 seemed to fly like a real "small plane". I tried to find a Hawk Sky to download, but no one had that Aircraft. The closest was the Easy Star but it doesn't have ailerons.

Yesterday morning while the BACON! was smoking I began building the plane. A couple of days prior I had found a forum discussing the "Hawk Sky" and read up on it, good thing to. I put it together using Epoxy and hot glue, instead of the glue that came with it. Here it is disassembled.
The instructions were relatively easy to follow, even though they were written in Engrish. Prior to actual assembly I connected everything up and verified all servos worked. I put the rudder and elevator on with epoxy, and the main wings on with a small amount of hot glue on the leading and trailing edge wing roots, this way if I needed to take it apart again I could. I attached the servo cables to the rudder and elevator, and tightened them with loctite. The Instructions had no information about how to wire or attach the motor (So I guessed). I also insulated the connections with shrink tubing instead of the small and inadequate insulators provided. Since the tech support at nitroplanes lied about the second battery I ordered I had to modify both of them so I could use them in the AC. Once assembled I centered and trimmed all the servos so that all the control surfaces were centered and neutral. Later in the day Chris and Mike came over and we went to a vacant lot near 40th street and McDowell (the city of Phoenix does not allow RC planes in their parks). Here is the plane Fully assembled and ready to go.
I did not put on the decals as I do not care that much about them, and they were munged in the box. I also mounted the small gum spy camera in the cockpit, So without further ado here is that video.

Just before flying it today I did some practice with a similar glider. I would say that the Clearview sim helped a lot, but the actual airplane was easier to fly than any of the ones in the simulator. I would have had more footage but the spy camera for some reason discharged it's battery very quickly. So here is some footage from the ground. Please excuse the glitches the tape needs to be replaced.
There were only 2 mishaps, One when I landed the first time (the landing gear fell off and we had to look for the wheels). However I was warned that this would happen, So I hand launched it for the remainder of the day, and the second was when the first battery got low and I lost signal, the plane semi crashed on a pile of dirt. It was kind of like those cheesey effects where in TV shows the plane always flies behind a hill before crashing, and all you see is the explosion.
I found the plane to be quite responsive. I did several loops and a couple of barrel rolls (Star Fox would be proud). I even strafed Mike and Chris, and almost hit myself as well. So here are a bunch of pictures courtesy of Chris.

Tonight I Reattached the wheels to the landing gear and epoxied it back to the frame. I also epoxied some Teflon tape to the underside of the fuselage so that if I have to do anymore belly landings it will save some wear and tear on the foam.
So anyone looking to buy this aircraft as their beginner RC plane will not be disappointed, and to anyone that says you can't learn to fly an RC plane using just a simulator, my response is:

Joseph Ducreux Sings - I

1/09/2010

The Pellicle and the Smoke

First let me say that the freezer bags half filled with water did a very good job of keeping the cure at around 36 degrees. 4 bags last 24 to 36 hours.

I got home last night around 5pm. drained the cure and hung up one of the slabs to dry for an hour. While that was happening I setup the smoker.
To power the fan I used an old multipurpose hobby electronics deal, thingy....(I don't remember what it is called). It has a signal generator, variable ac power supply, and variable dc power supply (among other things). Which was given to me by one of my sisters ex-husbands.
Anyways, I hooked the variable dc connection to the fan and set the voltage so that it would run the fan at the lowest voltage that would make the blades move. I then attached this to an electric timer to turn on and off about every 15 minutes. Off 15 minutes on 15 minutes.
I loaded the smoker with hickory wood chips and kept an eye on it till 23:00. Adding wood chips every 30 minutes or so. I ran a rod through the meat and hung it in the center of the cold smoker. I had to cut off the bottom 3 inches to keep it from touching the bottom of the can. I hung that piece from the rod as well.
After 5 hours of smoking I pulled the meat out and cut it into 4 or 5 inch wide pieces and froze them. I will slice later. I immediately fried some up, but will save the taste report for later. This morning I got up at 06:00 and did the same thing with the second slab. I will smoke this for at least 6 hours.

1/06/2010

The Cure

Last night I made my cure for the BACON! I skinned the bellies as well. I will not post pictures as it was rather gross, and extremely difficult. The nipples did not help matters (yes nipples). For some reason the phrase "it puts the lotion on..." kept popping into my head. Anyways the bellies are in the brine, in a cooler, with bags of ice, which I will have to change out about every 12 hours. Next step
"the pellicle".

12/31/2009

Building the Smoker

Way back when I first got into smoking meats, and before I decided to invest in a real smoker, I built the Alton brown Trash can Smoker. It worked so well I immediately purchased a real smoker. In preparation for smoking my BACON!, I converted it into a cold smoker. I went to Home Depot and purchased a second garbage can for $22.00. I had a long length of thin aluminum dryer tubing (never used) and some other parts. First thing I did was attach the Aluminum tubing and reducer to the new trash can at the bottom using pop rivets and duct tape on the inside.
I Attached the ducting with a large hose clamp. Attached a computer power supply fan to the top of the can on the opposite side.
The finished can looks like this.
I attached the other side of the hose to the old smoker and duct taped it in place.
I will be using a hot plate to generate the heat for the smoke. As a test I powered on the fan, lit some paper towels and put them in the old smoker. In a few seconds smoke came out. and after traveling through the long tube it was cooled by the outside air. Here is the results.
Unfortunately I do not have the meat ready to smoke yet, so I will start curing it this Wednesday and smoke it on the weekend.

12/30/2009

The Once and Future BACON!

Well..... After a long absence, I finally have something to blog about.

IT'S BACON!!!

I have been wanting to make my own BACON! for a while now, but I had to wait till the outside temperatures were low enough for cold smoking. That means I have a narrow windows of opportunity over the next month or so. Cold smoking requires temperatures of 70 degrees or less. Today I went to Hobe Meats at 6044 N 16th St, Phoenix, AZ and picked up 2 whole pork bellies (frozen, skin on). They were $4.99 per pound. Total was over $100.00 (if your gonna make BACON!, make a lot). I will be using the Alton Brown Cure for this, and will probably smoke them next week (once I build my cold smoker). Stay tuned.

10/23/2009

Hardware Review: Optimate Pro-S

The Optimate Pro-S is a battery charger/de-sulfator, made by Tecmate. The model I purchased came from www.batteryxpress.com and is the older version. The difference between the 2 is in the styling and the new model lets you choose the type of battery connected to it.

I purchased this battery charger because I have a growing collection of sealed lead acid batteries removed from uninterruptable power supplies. Many of them are completely dead but some may be just sulfated.

The unit claims to be able to recover a battery with as low a voltage as .8. It is primarily designed for "power sport" Lead acid batteries, used in ATV's, and motorcycles, but will work on any 12 volt lead acid battery.

Once I received the unit I selected some batteries, including one that had .5 volts. I expected the one with only .5 volts to fail but would try it anyways. As expected the .5 volt battery did not even register with the charger. I attached the battery to a standard charger which did not see it either. So I tricked the regular charger by jumpering a good battery to the bad battery while it was on the charger. This started it charging. Once it got to about five volts I hooked it to the Optimate. Interestingly enough it did not do a desulfate which is strange for a battery of this age (I later found out why). I left it on the charger for 24 hours but it was a no go.

I decided to just try batteries with at least 12 volts. It took a call to the manufacturer and some experimenting, as the instructions are written kind of like a run on sentence in a computer program. Here is what I found. If the charger is turned on when connected to the battery (manual says to do this) it does not check if the battery is sulfated even though the manual says that is the first thing it will do, however if the charger is connected to the battery after it is turned on it will test for sulfation. It appears that this is a bug in it's programming. The newer unit is supposed to be better behaved. The unit is supposed to indicate if a battery is good, ok, or bad using 3 lights, Green, Yellow, and Red. With combinations of the Green and yellow light for readings in between good and ok. I was never getting an indication of whether the batteries were any good. Just to test I hooked it to a known good battery and left it overnight. In the morning it registered good. So I started trying other batteries. I quickly found 2 other batteries that were good and I didn't know it.

I also found that If you repeatedly desulfate a battery you can revive it. Case in point I have 5 batteries that would not register as good, bad, or in between. I found that if I cycle though the batteries, letting each battery rest after its desulfating cycle, over time the resting voltage slowly climbs up. This worked so well that a battery I found that had a date code of July 1996 was brought back to good condition. Only testing will tell if it really is good, but the results were surprising.

I have also ran it on several of my car batteries, to see if they are still good, and they all are. I probably should have paid extra for the newer version, but once I got the kinks worked out, I am quite happy with the unit.

Update 5-6-10 None of the sealed lead acid batteries I tested, were revived enough to be used in a ups again. They could be used for other purposes but the UPS's would reject them.

Update 6-24-2012 From further research and testing it appears that the claim of reviving totally dead batteries is not possible. As my experiments showed.