I WIN!

Me: Tank you have to go!
Tank: No way I like it here, it's comfy.
Me: Well, your going, but first you have to loose some weight!
Tank: What do you mean?
Me: We're going to have a talk. SAY HELLO TO MY LITTLE FRIEND!
Tank: Wait! What are you doing with that SAW!?!?
Me: Muhuhuhahahaha!!!!
Tank: AAAaaaaaarrrrrggggggghhhhh!!!!! what a world... what a world....

And so I cut him up in to little pieces.


He begged and pleaded for his life, but I would have none of it. I made one concession, I removed the door to haul his carcass out. Never give up! Never Surrender!

My Stock Pics

Recently found where 2 more of my pictures have been published. I found this site. Here is a pdf preview with one of my pictures on the cover. The book can be purchased much cheaper at Amazon.com.

This picture is on the cover.

This picture is on page 17.

Making Progress

Taking advantage of the unusually cool weather this last week. I expanded the hole in the front of the tank and cut out a large section of the rear of the tank.

Never Give up! Never Surrender!

That Damn Tank

Previous owners of our house had installed a solar hot water system. When we got the house it wasn't working. I had long since removed the panels from the roof as their weight was damaging it. However, the hot water holding tank that was part of the system, was installed on the side yard, near the actual hot water heater. For some STUPID reason they had built a "closet" around it. Apparently they figured this tank would never break or need to be replaced because there is absolutely no EASY way to remove the tank without destroying the closet or the tank.

SO for the 14 years we have lived here I have been trying to remove the tank with out destroying the closet. A couple of years ago I bought a pair of pneumatic shears to cut away the outer covering of the tank, but had nothing to cut the tank up with. The tank cannot be rotated as there are pipes coming out the top of it in to the closet containing the hot water heater. The pipes cannot be removed because I cannot reach the solder joint without removing the roof. It cannot be tilted as the tank extends all the way up into the top of the closet. Nope, I will have to cut a large hole in it and then cut the tank up from the inside and remove it piece meal. Cutting torches and grinders are out of the question as I do not want to burn the house down.

I recently borrowed a reciprocating saw, and picked up some VERY expensive metal cutting blades from Lowe's. I managed to cut a decent sized hole in the tank. Hopefully over the next few weekends I will have this damn tank gone. NEVER give up! NEVER surrender!