7/08/2016

Starrsoft Win96 Win500 won't load in Windows 7

I have a legit copy of Win96 and Win500 and for reasons I do not know they both stopped working. Searches of the internet showed lots of solutions for citrix and terminal servers (which these files are not on) nor are the files on a network share.

The solution is to go in to System properties, Performance Settings, Data Execution Prevention and to add the win96.exe and win500.exe to the list of exceptions. Below are the error message related to the problem.
---------------------------------------------
Fault bucket 2762246838, type 1
Event Name: APPCRASH
Response: Not available
Cab Id: 0

Problem signature:
P1: Win96.exe
P2: 0.1.7.4
P3: 4eef5003
P4: StackHash_9f4e
P5: 0.0.0.0
P6: 00000000
P7: c0000096
P8: 00bd340e
P9:
P10:

Attached files:
C:\Users\xxxxx\AppData\Local\Temp\WERD494.tmp.WERInternalMetadata.xml
C:\Users\xxxxx\AppData\Local\Temp\WERE883.tmp.appcompat.txt
C:\Users\xxxxx\AppData\Local\Temp\WERE893.tmp.mdmp
C:\Users\xxxxx\AppData\Local\Temp\WERE8D3.tmp.hdmp

These files may be available here:
C:\Users\xxxxx\AppData\Local\Microsoft\Windows\WER\ReportQueue\AppCrash_Win96.exe_dd1f1d933413637c13bbca2e1e0dda3edbdb166_cab_53a9e8fe

Analysis symbol:
Rechecking for solution: 0
Report Id: 7fe17232-457c-11e6-b628-00224d88aa25
Report Status: 12
---------------------------------------------
Windows cannot access the file  for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Win96 Scanner Utility because of this error.

Program: Win96 Scanner Utility
File:

The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
    - It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
    - It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.

Additional Data
Error value: 00000000
Disk type: 0
------------------------------------------

Faulting application name: Win96.exe, version: 0.1.7.4, time stamp: 0x4eef5003
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000096
Fault offset: 0x00bd340e
Faulting process id: 0x2630
Faulting application start time: 0x01d1d98942198782
Faulting application path: C:\Program Files (x86)\Win96\Win96.exe
Faulting module path: unknown
Report Id: 7fe17232-457c-11e6-b628-00224d88aa25
------------------------------------------
Fault bucket 173410711, type 17
Event Name: APPCRASH
Response: Not available
Cab Id: 0

Problem signature:
P1: Win500.exe
P2: 0.2.0.7
P3: 533b3d88
P4: StackHash_8066
P5: 0.0.0.0
P6: 00000000
P7: c0000096
P8: 0076340e
P9:
P10:

Attached files:
C:\Users\xxxx\AppData\Local\Temp\WER72A7.tmp.WERInternalMetadata.xml

These files may be available here:
C:\Users\xxxxx\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Win500.exe_9cafbefff092ed2c6d7981ef5fbc5ec017761a_5b3286c3

Analysis symbol:
Rechecking for solution: 0
Report Id: 9800ad92-457c-11e6-b628-00224d88aa25
Report Status: 0
------------------------------------------
Windows cannot access the file  for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Win500 Scanner Utility because of this error.

Program: Win500 Scanner Utility
File:

The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
    - It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
    - It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.

Additional Data
Error value: 00000000
-------------------------------------------
Faulting application name: Win500.exe, version: 0.2.0.7, time stamp: 0x533b3d88
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000096
Fault offset: 0x0076340e
Faulting process id: 0x28f8
Faulting application start time: 0x01d1d9895a37ff92
Faulting application path: C:\Program Files (x86)\Win500\Win500.exe
Faulting module path: unknown